The Nokia 6288 is a model of cell phone featuring Bluetooth, email, a 2-megapixel camera and built-in FM radio. When you receive your 6288 from the store, it will be in several pieces. You will need to install the Subscriber Identity Module (SIM) card and battery before you can start making or receiving phone calls and text messages. Assembling the Nokia 6288 is designed to be straightforward and should take only a few seconds.
Instructions
1. Grip the phone, placing your thumb on the back.
2. Slide the back toward the top of the phone. The rear cover will detach.
3. Pry open the SIM card latch with a fingernail.
4. Slide the SIM card inside so the gold panel touches the phone's contact pins.
5. Close the SIM card latch so it holds the card in place.
6. Insert the battery so the metal contacts line up with those inside the phone. Push the battery down until it is firmly in place.
7. Replace the rear cover, making sure the transparent section covers the camera lens.
8. Slide the cover toward the bottom of the phone, in reverse of Step 2.
9. Pry open the MiniSD cover on the left side of the phone, near the bottom using a fingernail.
10. Slide the MiniSD card included with your Nokia 6288 with the contacts facing upward, with the cut-away side pointing toward the bottom of the phone. It will click into place.
11. Press the MiniSD cover shut.
12. Switch on the phone by pressing and holding the power button, located above the screen. The necessary parts have been installed and the phone is ready to use.
Tags: Nokia 6288, bottom phone, card latch, fingernail Slide, MiniSD cover