The Razr is a thin flip-phone, and like other cell phones, sometimes the cover is tough to get off. This can leave you calling customer service or driving to a store for assistance. Whether you're looking to replace your Razr phone's battery or put in a new SIM card, it's important to know remove the cover without the help of a professional.
Instructions
1. Turn your Razr phone off before you remove the cover. You don't want to get shocked or disrupt any circuitry.
2. Flip your phone open and remove the battery door. You should see a small silver strip or button at the top of the phone. You should be able to slide the back of the phone towards the silver strip or button. You can then easily pop the battery out using your fingers, a small flathead screwdriver or a credit card.
3. Remove the SIM card. Use caution when you pull the SIM card out, you don't want it to snap.
4. Unscrew the 2 T6 screws using a special T6 screwdriver.
5. Using caution and controlled force, pull the phone apart at the bottom using your fingers or a credit card. Be careful not to snap the plastic piece that holds the phone together at that spot.
6. Use the T6 screwdriver to remove the keypad, bending the metal tabs just enough to take it out.
7. Use a T5 screwdriver to take out the rubber stoppers holding the screen in.
8. Use controlled force to remove the cover. All you have to do is snap it in and out.
Tags: remove cover, your Razr phone, controlled force, credit card, silver strip