Problems with power windows on a Honda Civic can either be wiring-related or caused by wear and tear within the door. Determining the piece of the window system that is malfunctioning is critical in diagnosing and fixing the problem and restoring your window to working condition.
Instructions
Determining the Malfunctioning Part
1. Turn your car key to the "on" position, press the automatic window button down and listen for a sound. If no sound is present, then find your Civic's fuse box, which is typically below the dashboard in the front of the car. Locate the fuse for the window and remove it. Determine whether the fuse is burnt out by looking for a brown, foggy texture within it. Replace if necessary.
2. Return the fuse box to its proper place and press the power window button down. If the window does not go down, then turn off your car. Remove the silver paneling under the window by taking out each of the door covering screws, which can be found by removing a covering over on the arm rest or by prying apart the door panel. Place the screws on a clean sheet or towel. Remove the plastic setting that is now visible; carefully pull it away from the door frame by grabbing the gummy surface connecting the plastic to the frame. Place the plastic on your clean surface.
3. Look at the long, coiled piece of wire connecting the window to the metal window regulator. Replace the coil if rusted or broken. If the coil is intact, then scan the metal window regulator for loose or broken pieces. If a wheel or screw is out of place, then replace the piece.
4. Turn your car key to the "on" position again and press down on the power window button. If the window does not move, then replace the window regulator.
5. Return all removed housings to their appropriate places once the window is working.
Tags: window button, window regulator, button down, metal window, metal window regulator, power window button